ELEKTRA WoodTec Heating Foils are ready-to-install heating mats that come in 70 W/m and 140 W/m sizes. WoodTec Heating Foils are manufactured in compliance with EN 50366:2004(U) + A1:2006(U), and are made up of an ultra-thin heating cable connected to a fiber-glass mesh and aluminum foil. ELEKTRA WoodTec Heating Foils are intended for indoor use and direct heating, thus they should be fitted immediately beneath laminate or engineered wood flooring.
WoodTec Under Floor Heating Foils - ELEKTRA
Two Cores Electric Heating Foil Mat for Laminate Flooring and
Engineered Wood Flooring
Heating Foil Construction
- Heating cable
- Fiberglass mesh
- Heating cable joint to cold tail
- Shielded cold tail
- Shielded cold tail
- Aluminum shield
Floor construction
- Laminate flooring and/or engineered wood
- Protective layer (PE foil)
- The ELEKTRA WoodTec heating foil
- Flexible conduit
- Floor sensor
- Insulating underlay
- Vapour Barrier (PE foil)
| Type |
Dimensions (m x m) |
Surface (m2) |
Power rating (W) |
| WoodTec2 70/2,0 | 0,5 x 4,0 | 2,0 | 140 |
| WoodTec2 70/3,0 | 0,5 x 6,0 | 3,0 | 210 |
| WoodTec2 70/4,0 | 0,5 x 8,0 | 4,0 | 280 |
| WoodTec2 70/6,0 | 0,5 x 12,0 | 6,0 | 420 |
| WoodTec2 70/8,0 | 0,5 x 16,0 | 8,0 | 560 |
| WoodTec2 70/11,0 | 0,5 x 21,0 | 11,0 | 770 |
| WoodTec2 70/13,0 | 0,5 x 26,0 | 13,0 | 910 |
| Type |
Dimensions (m x m) |
Surface (m2) |
Power rating (W) |
| WoodTec2 140/3,0 | 0,5 x 6,0 | 3,0 | 420 |
| WoodTec2 140/4,0 | 0,5 x 8,0 | 4,0 | 560 |
| WoodTec2 140/5,0 | 0,5 x 10,0 | 5,0 | 700 |
| WoodTec2 140/6,0 | 0,5 x 12,0 | 6,0 | 840 |
| WoodTec2 140/8,0 | 0,5 x 16,0 | 8,0 | 1120 |
| WoodTec2 140/10,0 | 0,5 x 20,0 | 10,0 | 1400 |
