VCD-10 Under Floor Heating Cable - ELEKTRA

The ELEKTRA VCD-10 Heating Cable is a ready-to-install underfloor heating cable that meets EN 60335-1 standards. The VCD-10 heating cable includes a factory-installed cold tail cable.

ELEKTRA VCD-10 electric heating cable is put in rooms where the floor is not yet finished. It is usually the only source of heat in the space and acts as main heating. A primary heating system is necessary when it acts as a supplemental heating source “The Warm Floor Effect”.

ELEKTRA VCD 10 Specifications

• Power output: 10 W/m
• Power supply: 230 V ~ 50/60 Hz
• External dimension of cable: ~ 5 x 7 mm
• Min. installation temperature: -5°C
• Max. working temperature: +95°C
• Conduit cables: 1 x 2.5 m; 3 x 1.0 mm², 3 x 1.5 mm² or 3 x 2.5 mm²
• Type of heating cable: double-core, hybrid conductor screen, single-side power supply
• Insulation: XLPE
• Outer sheath: heat resistant PVC
• Rated power output tolerance: +5%, -10%
• Min. radius of bending cable: 3.5 D
• Protection: IPX7
• Product certificates: EAC
• Certificate of ISO 9001: IQNET, PCBC
• Product mark: CE