December 2006 SAMM got approval from Huber Suhner for production
After 8 months of signing the contract to fulfill the terms of the production agreement in June by Huber & Suhner SAMM will also have the authority and certificate to use the logo in the production work.
Since the beginning of June, and Switzerland-based international quality SAMM\’s Huber & Suhner quality production that is documented.
Who is Huber&Suhner ?
Huber & Suhner a Swiss company with 100 years of excellence in the Search Solution to create a sense of connection is the representative. Fiber optic patch cord, and also known as pig-tail and increases the need for data used in each field connection between fiber optic cables to complete solutions. For example, all fiber optic connectors are being manufactured by H & S and all the connectors used in the assembly of optical polishing equipment is also manufactured by H & S quality. That is the only center in the world range from the fiber optic patch can all cord\’ları on rare among companies.
Huber & Suhner is also low and high frequency cables are used by customers all over the world the highest level.
SAMM\’s entire production plant to Z of H & S equipment equipped with the H & S and production quality of the entire instruction adapted to their production and technical personnel required training in Switzerland and Turkey with H & S quality has been applied to their own production. During the past 1 month of production in the pig-tail and patch cord all for technical and mechanical in accordance with international standards and that is documented.
Serial production of the authority to use, and Huber & Suhner logo area at the same time samme within H & S organizations other customers gained authority to direct exports.
Huber & Suhner supply the following products:
1. Fiber Optic additional boxes
2. Fiber Optics and termination roof boxes
3. SM (9 / 125) and MM (62.5/125 and 50/125) cables
4. Break-out buildings in the distribution cables, HFFR (Halogen Free Flame Retardent) fireproof cables.
5. Fiber optic connectors, LX5, LC, MU, LSH, SC-CMAX, U-Link, connector adapters, ST, SC, FC, and each type of optical attenuation contemptuous and divisive. Plug-type and In-line attenuation etc..
6. WDM, DWDM, and the connector and cable for ADSL applications
7. RF cables and many other custom application cables
What is Fiber optic Patch cord, and Pig-tail ?
Fiber optic cables between cities in the high transmission and represent the campus network has the capacity to move data and is the most secure and high-capacity data transport media. Fiber optic cables in a building, fiber optic distribution in plants (termination) boxes are being finalized. Termination of the fiber optic cable will be carried out additional pig-tail\’e. Adding Fiber optic fusion process in general splice (fusion attachment) is done with. Determined by the type of a pig-tail\’in the bare fiber connector is the other side. U-link has been added to the bare fiber is called mechanical connector adapter as cord\’a are combined with the patch. Every two Pig-cord\’un Patch tail\’den only difference is that tarafıdan connector. So Pig-tail and by the fiber optic connector termination cord\’un patch box patch in the U-Links have been combined in the other end hyssop active equipment (media converter) is connected. Fiber optic cable is made in the same way the other side of an optical transmission network has been established between cities or high-speed wide area networks will be connected.
Fiber optic cable with a minimum of optical losses in order to connect active equipment and certain standards of high quality connection cables should be used between losses. To 0.2 dB of attenuation in fiber km at a distance is 10 kilometers long in total loss of 2-2.5 dB are available. A large part of the budget of poor quality optical patch cord and pigtaillerde is lost. Therefore, all the pig-tail and patch cordların quality of networks is very important.
In particular, the fiber optic plants thousands terminasyonun find and replace defective cord\’s a large patch of time and causes loss of service.
In addition, all produced by certified SAMM\’s Huber & Suhner, and pig-tail tuned patch cord – has been centered. So with the hard as nails connector fiber direction is determined to be at least for the optical losses of the ceramic fiber power meter with the help of return is determined by the best angle of the optical transition.
Fiber optic patch cord optic patch cord for the vast majority of its customers and to test the pig-tail\’in quality or did not have a chance to observe many of the optical loss, regardless of the connection between hand use even produced.
Huber & Suhner the quality and sustainability in terms of cooperation with SAMM’s is important.
About Samm Teknoloji
Samm Teknoloji is a manufacturing and engineering company with services in different sectors, especially fiber optic systems and IoT. It has many patents in fiber to the home infrastructure (FTTH) and Data Center equipment, and has developed a wide variety of products in its own field and presented it to the use of the industry.
In addition, it is among the leading companies with its services in turnkey electrical contracting works, heat tracing, and informatics sectors.
Trademarks
Samm, Samm Teknoloji, Foyer, FOTAS are registered Trademarks of SAMM Teknoloji A.S. Other names may be trademarks of their respective owners.