ELEKTRA UltraTec 10 heating cables are ready-to-install heating devices that meet EN 60335-1 standards. They are made up of an ultra-thin, high-temperature-resistant cable that is finished with a cold tail. The UltraTec system is intended for usage indoors for direct heating. UltraTec 10 heating cable should be put immediately beneath the heated surface, using either flexible tile adhesive or self-leveling compound.
UltraTec 10 Under Floor Heating Cable - ELEKTRA
10 W/m Single-side Powered Electric Heating Cable
ELEKTRA UltraTec 10 Specifications
- Power output: 10 W/m
- Power supply: 230 V ~ 50/60 Hz
- Ready-to-install Lengths: 8.5 to 203 m
- Power Supply Cable: 2.5 m
- Power Output: 10 W/m
- Power Supply: 230V 50/60 Hz
- Anti-shock Protection: RCD
| Type | Heating cable length (m) | Power output (W) |
| UltraTec 10/90 | 8,5 | 90 |
| UltraTec 10/135 | 13,5 | 135 |
| UltraTec 10/145 | 15,0 | 145 |
| UltraTec 10/220 | 22,5 | 220 |
| UltraTec 10/285 | 28,5 | 285 |
| UltraTec 10/320 | 32,0 | 320 |
| UltraTec 10/400 | 40,0 | 400 |
| UltraTec 10/450 | 45,0 | 450 |
| UltraTec 10/555 | 55,0 | 555 |
| UltraTec 10/690 | 70,0 | 690 |
| UltraTec 10/780 | 78,0 | 780 |
| UltraTec 10/980 | 98,0 | 980 |
| UltraTec 10/1100 | 110,0 | 1100 |
| UltraTec 10/1320 | 132,0 | 1320 |
| UltraTec 10/1650 | 165,0 | 1650 |
| UltraTec 10/2050 | 203,0 | 2050 |
